Page 8 of 11
Maintenance
Maintain the product by adopting a program of conscientious repair and maintenance in accordance
with the following recommended procedures. It is recommended that the general condition of any tool
be examined before it is used. Keep your tool in good repair. Keep all cutting tools sharp and clean.
Properly maintained cutting tools with sharp cutting edges are less likely to bind and are easier to
control. Keep handles dry, clean, and free from oil and grease. Also refer to the engine manufacturer’s
instruction manual for additional information about engine maintenance. The following chart is based
on a normal operation schedule.
Maintenance Interval
Maintenance Point
Daily before operating
Check all the hardware, Tighten as required.
Keep cart clean.
Parts Diagram
Parts List
Reference
Part Number
Part Description
Quantity
1
1
Platform
1
2
2
Elbow 1 with handle holder
1
3
3
Support Tube
2
