Page 10 of 14
2. Use a soft damp cloth and wipe with a dry cloth.
3. The motor bearings are lubricated at the factory and should not require any additional lubrication.
However, if bearing lubrication is needed, apply a small amount of a high temperature bearing
grease.
4. Use a mild detergent to clean the blades and guards. Avoid allowing the cleanser to come in contact
with the motor bearings or windings.
5. Allow the fan to completely dry before the next use.
⚠
WARNING
Disconnect power before servicing.
Use OSHA approved lock-out tag-out devices on power supply to prevent shock and/or
electrocution.
#52852 & #52853 Parts Diagram
#52852
& #52853 Parts List
Part#
Description
Qty.
Part#
Description
Qty.
1
Screw
3
2
Cylinder
1
3
Screw nut
4
4
Square flat referral
4
5
Screw
4
6
Fan assembly
1
