Page 10 of 12
5.
The propeller and motor should be cleaned periodically to prevent overheating, and/or operating
in an imbalanced condition.
6.
Do not repair propeller if it becomes damaged. The propeller is accurately balanced at the
factory and should be replaced if damaged.
7.
Motor is permanently lubricated.
Troubleshooting
Use the table below to troubleshoot problems before contacting service personnel or your local
dealer. If the problem continues after troubleshooting, call your local dealer for assistance.
Failure
Possible Cause
Corrective Action
Unit fails to operate
Master switch not turn on
Turn on the master switch
Blown fuse or open circuit breaker
Replace fuse or reset circuit breaker
No power
Contact power company
Defective motor
Replace unit; motor is not field serviceable
Excessive vibration
Screws mounting fan to the plywood are
torqued insufficiently
Torque the screws well to secure the gable
fan unit
Propeller imbalance due to accumulation of
dirt, etc.
Clean propeller
Replacement Parts
For replacement parts and technical questions, please call Customer Service at
1-800-222-5381
.
Not all product components are available for replacement. The illustrations provided are a
convenient reference to the location and position of parts in the assembly sequence.
When ordering parts, the following information will be required: item description, item model
number, item serial number/item lot date code, and the replacement part reference number.
The distributor reserves the rights to make design changes and improvements to product lines
and manuals without notice.
