4. Attach the front axle assembly to the front frame using M8x40 Phillips flat head bolts (B-2), M8
lock nuts (F-2), and M8 washers (G-2). Attach the front axle support arm to the frame using M8x20
hex head bolts (E-2), M8 lock nuts (F-2), and M8 washers (G-2).
5. Attach the frame to the tray using M8x20 carriage bolts (D-2), M11 washers (H-2), M8 washers
(G-2), and M8 lock nuts (F-2).
6. Attach the wheels by first placing the wheel spacers (K-4) onto each axle, then placing the wheel
(4) onto each axle and finally placing the wheel washers (I-4). Insert the cotter pins (J-4) into the
hole at each end of the axles and bend back the ends of the cotter pins with pliers to keep them in
place.
7. Attach the handle to the yoke using M8x60 hex bolt (A-1), M8 lock nut (F-1), and M8 washer
(G-1).
Page of 9
6
