Height Adjustment
Lean the table on its side and adjust the legs to a
desirable height with the following steps. Ensure all
the legs are adjusted to the same level. When one
side is adjusted, flip the table over and conduct the
same steps on the remaining legs.
The height on your massage table can be adjusted by
approximately 10” in additional height; this will
depend on which model of table you purchased.
1
Loosen the rubber knobs by
turning it counter clockwise, and
separate it from the leg and frame.
2
Place the leg at
the new desired
height location
and back over
the metal thread.
3
Return the rubber knobs and
tighten onto the metal thread.
Facepillow & Platform
The following steps will guide you through mounting the headrest to your table.
Remove the platform and
facepillow from the elastic
straps under the table bed.
Release the handle and extend
the dowels outward. Lock the
handle after the platform is set
to the desired level.
1
2
3
Insert the dowels into the
wooden table outlet, and
place the facepillow cushion
onto the platform.
Approx.
10”
Dowels
Platform
Handle
