16
Connection
The connection menu allows mainly settings TV formats, audio and video formats and HD resolutions.
Access to the connection menu
1.
Press the
MENU
key.
2.
Using the
s
and
t
keys, select
Setup
then press
OK
.
3.
Using the
s
and
t
keys, select
Connection
then press
OK
.
Modify the connection settings
Use the arrow keys to modify the connection settings. Below are the possible values for each item.
TV format:
4:3, 16:9
Zoommode:
for4:3:letterbox,pan&scan,zoom14:9,fullscreen
for16:9:pillarbox,zoom16:9,zoom14:9,fullscreen
TV mode:
CVBS, SVHS and RGB
VCR mode:
CVBS and SVHS
Video standard:
PAL, SECAM
SPDIF mode:
stereo, multi
HDMI device Info:
Connected, Not connected
Resolution policy:
automatic or manual
TV resolution:
If manual: 576p, 720p, 1080i
Advice:
for a quick access to video formats, press the
s
and
t
arrow buttons.
Exit the connection menu
Toexitthismenupressthe
MENU
key again.
Restore default settings
Be careful when using this menu which is intended to reset your decoder to factory parameters. It means
thatallyourpreferences(favouritelists,timers,preferredconnectionsetc…)willbeerasedandthe
decoder will have to restart the first installation.
Restore default parameters
1.
Press the
MENU
key.
2.
Using the
s
and
t
keys, select
Setup
then press
OK
.
3.
Using the
s
and
t
keys, select
Restore default settings
then press
OK
.
4.
Enter your decoder PIN code.
A pop-up message appears to ask you to confirm the selection.
5.
To cancel the reset, highlight
No
, press
OK
and press the
EXIT
key to return to the viewing mode.
To confirm the reset, highlight
Yes
and press
OK
.
The decoder will restart in first installation. For more information on how to process the installation,
please refer to page 9.
