5
PART 2 • English
English
15. gREEn
For Teletext function, in OSD for specific functions.
16. YEllow
For Teletext function, in OSD for specific functions.
17. blUE
In viewing mode opens the EPG overview, for Teletext and in OSD for
specific functions
18.
pq
Scrolls channel and EPG information up/down in viewing mode, in
OSD for navigation.
19.
tu
In OSD for navigation
20. ok
In viewing mode displays the channel list, in Menu mode activation/
confirmation of the specific item
21. mEnU
Opens the menu in viewing mode, within menu you can directly exit to
viewing mode
22. EXIT
In viewing mode removes appearing messages /Info banner, in OSD
one step back or cancel actions
23. Tv/RAD
Toggles between TV and Radio mode
24. AsPECT
Show information about the screen format in broadcast.
25. hIsToRY
Displays the last watched channels list in viewing mode including
EPG information
26. sIgnAl
Display signal and quality of satellite signal from current selected
satellite and channel
27.
5
Fast rewind
28.
1
PLAY / Opens the playback list in viewing mode
29.
3
Stop
30.
6
Fast forward
31.
2
In viewing mode starts Timeshift, in Multimedia for Pause function
32.
4
Starts recording of the actual broadcast
33. f1~f4
No function
3.0 ConnECTIons
3.1 basic connection using a scart cable
Fig. 4.
1. Connect the LNB of your satellite dish to the SAT IN connector of your receiver using a good
quality coax cable and suitable ‘F-connector’ plugs.
2. Connect one end of a good quality Scart cable to the TV SCART connector on your receiver
and the other end to the SCART input of your TV.
3. Plug the power adapter & cord to a suitable wall outlet.
3.2 basic connection using an hDmI cable
Fig. 5.
1. Connect the LNB of your satellite dish to the SAT IN connector of your receiver using a good
quality coax cable and suitable ‘F-connector’ plugs.
2. Connect one end of a good quality HDMI cable to the HDMI output on your receiver and
the other end to the HDMI input of your TV.
3. Plug the power adapter & cord to a suitable wall outlet.
3.3 Connecting multiple fixed dishes using a DisEqC 1.0 switch
Fig. 6.
1. Connect the LNB’s of your fixed dishes to the inputs of a DiSEqC 1.0 switch
2. Connect the output or “to receiver” connector of the DiSEqC 1.0 switch to the SAT IN
connector on your receiver.
3. Refer to section 3.1 or 3.2 for TV and mains connections.
