Strong SRT 7335 CI, User Manual

Page: 7 / 31

PART 1 • English
6
2.2 Rear Panel
1. SAT IN
To connect the coaxial cable from your LNB on the satellite dish to this connector.
2. SAT OUT
Gives you the possibility to connect an extra satellite receiver (analogue or digital).
3. TV SCART
Use this connector to connect your receiver with your TV set using a SCART cable.
4. DVD/ VCR SCART
Use this connector to connect your receiver to your video recorder using a SCART cable.
When the receiver is in stand-by mode video/audio signals from your VCR will be looped
through the receiver to your TV set.
5. Y, Pb, Pr
Connects to Component input of TV.
6. VIDEO
This connector has a constant video signal for additional VCR-connections.
7. Audio Left/Right
Outputs for Audio Left (White) and Right (Red)
8a. S/PDIF Coax
Output for connecting to a digital audio amplifier
8b. S/PDIF OPTICAL
Output for connecting to a digital audio amplifier.
9. HDMI
Output for connecting to HDMI jack of TV.
10. RS-232 Serial Port
This serial port can be used to connect your PC to your receiver to download new software
versions to your receiver.
11. USB
Connects to USB device.
12. Power ON/OFF Switch
Powers on/off.
13. Power Cord
Your receiver requires a current of 90 ~ 240 V AC (Auto-selectable), 50/60 Hz ±5 %. Make
sure to check the power specification before connecting your receiver to the wall outlet.