PART 1 • English
10
8.2.2.1 DiSEqC 1.2 positioner setup
Mount�
installed by a professional.
In “
Antenna Setup
” menu set “
Positioner
” to “
DiSEqC 1.2
” and press
OK
button to enter to “
Antenna position
” menu.
n
Use
CH
p
/
q
to move up and down in the list.
n
Use
VOL
t
/
u
to change the setting.
Satellite
:
select satellite position of which you would like to setup.
Transponder
:
select reference transponder which should be used for signal quality indication.
Move
:
when this item is highlighted press
VOL
t
/
u
to move dish in East/West direction accordingly.
Save position
:
highlight this item and press
OK
to store current position of the dish for selected satellite. The �symbol shown
near menu item once position is stored.
Reference position
:
highlight this item and press
OK
if you need to turn dish to reference position (0 degree position).
Function
:
Set west limit
/
Set east limit
– select it and press
OK
if you want to store current position of the dish as west / east
limit;
Disable limit
/
Enable limit
– select and press
OK
to disable / enable limits;
Recalculate
– select and press
OK
to recalculate positions of all satellites based on adjustment for current satellite;
Nudge west
/
Nudge east
– select
and press
OK
for fine adjustment of the dish position;
Nudge tilt up
/
Nudge tilt down
– use this command if your
positioner support adjustment of elevation.
Antenna status
:
show you current status of the antenna (stopped, moving to East/West).
Signal Quality
:
show quality of signal for selected reference transponder. Adjust antenna position in order to get maximum level
of the Signal Quality.
n
Press
EXIT
to go back to the previous mode.
8.2.2.2 USALS positioner setup.
�
installed by a professional.
In “
Antenna Setup
” menu set positioner to “
USALS
” and press
OK
button to enter to “
Antenna position
” menu.
n
Use
CH
p
/
q
to move up and down in the list.
n
Use
VOL
t
/
u
to change the setting.
Satellite
:
select satellite position of which you would like to setup.
Transponder
:
select reference transponder which should be used for signal quality indication.
My longitude
:
set longitude of your location.
My latitude
:
set latitude of your location.
Move
:
highlight this item and press
t
button to turn dish to the position corresponded to the selected satellite.
Press
u
button to stop dish.
Reference position
:
highlight this item and press
OK
if you need to turn dish to reference position (0 degree position).
Signal Level and Quality
:
show level and quality of signal for selected reference transponder. Adjust longitude and latitude of your
location in order to get maximum values of the Signal Level and Quality indicators.
n
Press
EXIT
to go back to the previous mode.
8.2.3 Channel Search
Press
OK
on ‘
Channel Search
’ in the
Setup Menu
.
Set the
Satellite
,
Tune Method
,
Transponder
,
Frequency
,
Symbol Rate
,
FEC
and
Function
.
n
Use
CH
p
/
q
to move up and down the list.
n
Use
VOL
t
/
u
to change the setting.
Satellite Name
:
choose from the list of satellites selected in “Antenna setup” menu.
Tune Method
:
Main options are:
“
Sat
” –
receiver will search channels according to stored list of transponders.
“Sat – NIT” - receiver will search channels according to stored list of transponders and in addition use network information.
This mode allows you to find all channels, even from new appeared transponders.
“TP” –
this method is to search channels from one transponder.
