Strong SRT 6130 User Manual Download Page 6

PART 1 • English

6

„

Channel Memory: about 2900 Digital TV Channels, about 1400 Radio Channels;

„

Supports software downloading via satellite (O.T.A.);

„

S/PDIF output for connection with a digital audio amplifier.

Accessories

„

User's Manual;

„

Remote contol unit;

„

2x Batteries (AAA type);

„

Warranty Card;

„

Remote Eye: The external remote eye is an optional accessory.

Note: The batteries should not be recharged, disassembled, electrically short-circuited or be mixed or used with other types 

of batteries.

1.3 Safety Precautions

To maintain your receiver's optimum performance, you are advised to apply the following safety precautions: 

„

Read this manual carefully and make sure you fully understand the instructions given;

„

Refer all maintenance or servicing to suitably qualified personnel;

„

If you wish, you may clean your receiver with a soft lint-free cloth slightly made damp with a mild soap solution, only after
disconnecting from the mains voltage supply;

„

Do not use alcohol or ammonia based liquids to clean the receiver;

„

Do not open the receiver cover, as you will be exposed to a shock hazard;

„

Do not open the receiver cover this will void your warranty;

„

Do not place any objects on top of the receiver because this might prevent proper cooling of the components inside;

„

Make sure no foreign objects fall through the ventilation slots because this could cause fire or an electric shock;

„

Wait a few seconds after switching off the receiver before you move the receiver or disconnect any equipment;

„

Please ensure that that the electrical power supply corresponds with the voltage on the electrical identification plate at the
back of the receiver;

„

It is a necessity that you only use an approved extension and compatible wiring that is suitable for the electrical power
consumption of the installed equipment;

„

If the receiver does not operate normally even after strictly following the instructions in this user manual, it is 
recommended to consult your dealer. 

1.4 Storage 

Your receiver and its accessories are stored and delivered in a well protective packaging against electric shocks and moisture. When
unpacking it, make sure that all the parts are included and keep packaging away from children. When transporting the receiver from
one place to another or if you are returning it under warranty make sure to store the receiver in its original packaging with its
accessories. Failing to comply with such packaging procedures could void your warranty.

1.5 Equipment Set-up 

We recommend you to consult a professional installer to set up your equipment. Otherwise, please follow the following instructions:

„

Refer to the user manual of your TV and dish;

„

Make sure that the SCART cable is in a good condition;

„

Make sure that the SCART cable connections are well shielded;

„

Make sure that the outdoor components of the dish are in good condition;

„

Make sure that the dish is aimed at the satellite of your choice;

„

Make sure that the dish is connected with the correct I.F. coaxial cable (75 Ohm) and is in good condition.

Summary of Contents for SRT 6130























Reviews: