PART 1 • English
13
English
5.3.3.3 Parental Setting
Set some programs to lock status. If a program is locked, the parental PIN code has to be entered
correctly before watching the locked program. Use
UP
/
DOWN
keys to select the channel you want
to lock and press
OK
to confirm.
5.3.3.4 Change PIN
PIN is Personal Identification Number. To modify the password, you need to enter the current PIN,
a new 4 digit password and once again the new one for confirmation; the system password will be
changed then.
5.3.4 System Information
Displays the software version information. Press
OK
/
EXIT
keys to return.
5.3.5 System Update
5.3.5.1 Update from Receiver to Receiver
You use this menu to update software from receiver to receiver.
When it is necessary to update the System, please follow these steps:
1. First power off both receiver, connect them with cross RS-232.
2. Then power on master receiver (master is receiver from which you will copy software) and
keep slave receiver off. Navigate in the menu of master receiver and select
“
System Update – STB to STB
”.
3. When the status displays “detecting slave STB”, power on slave STB, after the master STB
detects the slave, the master starts transmission and burns.
4. While transmitting and burning, it is very important to avoid other operations such as
power off because this may cause destruction of the data in the FLASH memory and the
receiver will need to be repaired.
5. When update is complete, first power off both STBs, then disconnect the RS-232 line.
Tips
System Update just updates the software. The programs database will not
be updated.
