5
Unpacking and setup hardware
Below
pictures
show how our product looks like and the way the hardware is installed.
Front panel
Rear panel
NOTICE: The pictures are for references only; please
consider
the object as the standard.
Hardware
I
nstallation
As shown, connect the interfaces on
your
television
set
with the corresponding interfaces
on
your receiver
(
the TV set is connected to your receiver by an HDMI cable / Jack to RCA
).
Your dish cable is connected to your receiver through the LNB-IN interface
.
the receiver
can be switched on by having it connected to the electricity socket by using the AC/DC
power adaptor.
NOTICE: The picture is for references only, please
consider
the object as the standard.
