Strong SRT 32HC4432, User Manual

Page: 11 / 32

2. When the battery's voltage is insufficient which affects the use range, you should replace it with
a new battery. Remove the batteries from the remote-control unit if you do not intend to use it
for a long time.
3. Do not use different types of batteries (for example Manganese and Alkaline batteries) together.
4. Do not put the battery into fire, and charge or decompose the battery.
5. Please dispose batteries abide by relevant environmental protection regulation.
2.6 Using the remote control
„
Use the remote control by pointing it towards the remote sensor. Items between the remote
control and the remote sensor could block normal operation.
„
Do not cause the remote control to vibrate violently. Also, do not splash liquid on the remote
control or put the remote control in a high humidity place.
„
Do not place the remote control under direct sunlight which will cause deformation of the unit
by heat.
„
When the remote sensor is under direct sunlight or strong lighting, the remote control will not
work. If so, please change the lighting or TV's position, or operate the remote control closer to
the remote sensor.
* to confirm your choices use
OK
button or right
ARROW
button.
NOTE:
This TV is equipped with two remote controls. You can choose to use both
remote controls or just one.
3.0 FIRST TIME INSTALLATION
After all connections have been made properly, switch your TV on.
Please follow the initial installation (FTI) procedure on your screen and complete the installation. It will
take a few minutes.
TV channels installation
Select your Country and confirm your selection with
OK
.
Select TV Mode as Home or Retail to define place of TV installation and usage.
7
English