Press
t
u
to select the satellite your dish is aimed at. Use the
t
u pq
buttons to change settings for
your satellite installation for each specific satellite.
Channel Search
Press
pq
t
u
to highlight the options of choice and press
OK
to start the channel search.
Scan Mode
Choose between
Default
(recommended),
Blind Scan
and
Network
and
Fast
Scan
Channel Type
Select
Free
to search Free-To-Air channels only,
Select
Scramble
to search Encrypted channels only,
All Channels
to search FTA
and Encrypted channels.
Service Type
Select
DTV
to search Digital TV channels only,
RADIO
to search radio channels
only or
All
for a complete search.
It is recommended to use the default settings.
NOTE:
Fast Scan option allows you to load pre-installed channel list from some
providers. This selection list appears when you have chosen Fast Scan and
confirm with
OK
button.
3.2 DVB-T/T2 installation
Terrestrial Setting
Here you only need to press
OK
to start searching.
All settings are automatically set by country selection you made in first step.
NOTE:
If you have an active antenna, please check the user manual of the antenna
for external power supply. The TV can NOT supply power used for an active
antenna.
3.3 DVB-C installation
Cable Setting
Press
pq
t
u
to highlight your settings.
Scan type
You can select
Network Scan
,
Full
, or
Blind Scan
. (Default
Network Scan
for
quick search advised).
NOTE:
Full
scan will have a duration of approximately 20 minutes, depending on
your cable network.
Network ID
Please enter (with
0 ~ 9
) the used
Network ID
from your provider.
Frequency
Please enter (with
0 ~ 9
) the main frequency used by your provider in KHz.
Symbol
Please enter (with
0 ~ 9
) the used
Symbol
from your provider. (Ks/s)
8
Summary of Contents for SRT 24HC4023
Page 2: ......
Page 3: ...SMARTKEY INFO RETURN FAV ...
