SM-RAZOR-F Instruction Manual
pg.5
© 2015 Strong
TM
A. Pre-drill holes into concrete using 5/16” drill bits to a depth of 2 1/2”. Insert
concrete Wall Anchors (B) and tap in-with hammer, if necessary (Figures 2
& 3).
B. Insert the four Lag Screws (A) into the Wall Anchors through the Wall Plate and
tighten all bolts.
WARNING:
Tighten bolts so that wall plate is firmly attached, but do not over
tighten. Over tightening can damage the bolts, greatly reducing their holding
strength.
Correct
concrete
concrete
plas ter/
drywall
plaster/
drywall
Incorrect
C
u
ta
w
a
y
V
ie
w
Figure 2
Figure 2
Drill holes and
insert anchors.
Place wall arm
assembly plate
over anchor and
secure with
lag screw.
Tighten all
lag screws.
Wall Arm
Concrete
Wall
Flange Bolt
Figure 4
Figure 3
