PART 1 • English
10
6.2 Accessing the Electronic Program Guide (EPG)
1. Press
EPG
to enter
EPG menu.
2. Press
[2]
to switch between channel list, events schedule of the selected channel and now/next events.
3. In the event schedule, press
OK
to book the selected event, press
[3]
to open the
Detail menu
for the
selected event.
4. Press
[1]
to open the
Booking list menu
.
6.3 Accessing the favourite channels
1. Press
FAV
button to enter the favourite group list.
2. Press
pq
buttons to select the desired favourite group.
3. Press
pq
buttons to select the favourite channel.
A.1 TROUBLESHOOTING
There may be various reasons for the abnormal operation of the receiver. Check the receiver according to the procedures
shown below. If the receiver does not work properly after checking it, please contact the dealer. Do NOT open the
receiver cover.
It may cause a dangerous situation and the warranty will get void.
Problem
Possible cause
What to do
Standby light not lit
Mains lead unplugged
Check mains lead/power connector
No signal found
Antenna is disconnected
Antenna is damaged/misaligned
Out of digital signal area
Active antenna requires to switch ON
antenna power/external feed
Check antenna lead
Check antenna
Check with dealer
Switch receiver’s Antenna Power ON/
connect external feed
No picture or sound on TV/VCR SCART/AV input is not selected on your TV
TV or receiver are not connected to mains
Switch to correct TV input
Check mains lead
Scrambled channel message
Channel is scrambled
Select alternative channel
No response of remote control
Hand set batteries exhausted
Replace handset batteries
Forgotten menu or channel
lock code
Contact local Service Hotline or send email to
our Support via www.strong.tv
After moving the receiver to
another room you are no longer
able to receive
digital reception
The antenna feed former new point may
come through a distribution system which
may reduce the digital signal now received
by the box.
Try a direct feed from the antenna
