Strong Planio, Assembly Instructions Manual, Page: 33 / 36

STRONG Planio – Assembly Manual
33
Bottom guide – bottom-up
Use the template to attach from
the body – hole C
Bottom guide – from the body
ø 4.5 mm
9. Guide installation
4 × 16
4 × 30
C
11.1 – Loosen the screws, insert into the top guide before inserting the activators
11.2 – Slide the door so that the damper slider engages the activator of the collision device
11.3 – Adjust the gap between the doors
11.4 – Tighten the screws
8. Collision device adjustment (3-leaf set only) – bottom guide
Loosen the screws, insert into the top guide before inserting the activators. After
adjusting the upper collision device, keep the leaves together and extend the
lower dampers until they are fully pushed in. Then tighten the screws.
7. Collision device adjustment (3-leaf set only) – top guide
GAP
4 × 16