Strong 5-IN-1, User Manual

Page: 3 / 18

www.strongsat.com
STRONG UNIVERSAL REMOTE CONTROL “5 in 1”
Thank you for purchasing the STRONG “5 in 1” Universal Remote Control.
The remote can operate up to 5 different devices: TV, VCR, DVD player and
2 satellite receivers or cable TV boxes. The remote is powered by 2 “AAA”
type 1.5 Volt batteries – not included in this packaging.
Easy set-up
1. Insert 2 new batteries into the back of the remote. Following the
markings in the battery compartment.
2. Switch “ON” the device you wish to operate (e.g. your TV).
3. Look for the brand name of the device you wish to control in the
attached CODE LIST at the end of this user-manual (e.g. TV: SONY).
4. Next to the brand name you will find one or more 3-digit code numbers
(e.g. SONY: 028) which have to be entered in the following way:
5. Press and hold both the key and the appropriate device key , ,
, , on the remote until the LED turns ON and then release both
keys. Then enter the 3-digit code numbers by using the numeric keys.
The key-in time is 10 seconds (see point 4). (e.g.
+ + 028).
Use following device keys:
for your TELEVISION,
for your VIDEO RECORDER,
for your DVD-PLAYER,
for your SATELLITE RECEIVER – default setting for
STRONG SRT 6125, 6155, 6355
for your second device: SATELLITE RECEIVER / CABLE BOX.
If the code number you inserted is correct (present in the database) then
the LED light will turn OFF immediately. If this number does not exist then
the LED is still ON. The key-in time is 10 seconds, if any key is not pressed
within 10 seconds then the LED will turn OFF and the same procedure must
be followed again (points 4-5).
6. Aim your remote control at the selected device and press the
Power key. Your remote control is set up correctly if the device switches
OFF and ON. Then check if keys e.g. VOLUME -/+ or e.g. at VCR/DVD-
Player:
key can be operated.
7. If your device does not react and/or operates incorrectly, repeat step 3
to step 6 by entering the next 3-digit-code from the list.
8. If the brand of your device is not shown in the code number list, or if
none of the digit codes operates your device properly, you can try the
“automatic search function” :
Automatic search function
1. Switch ON the selected device you would like to control: TV, VCR,
DVD-Player, STB 1 or STB2.
2. Press and hold both the key and the appropriate device key until
LED light is ON and then release both keys.
1
GB