11
English
Afrikaans
Bahasa Melayu
Català
Češna
Dansk
Connue
Language
Algeria
Agola
Albania
Australia
Bengal
Belgium
Locaon
• Use the remote control by pointing it towards the remote sensor. Items between the remote control
and the remote sensor could block normal operation.
• Do not cause the remote control to vibrate violently. Also, do not splash liquid on the remote control or
put the remote control in a high humidity place.
• Do not place the remote control under direct sunlight which will cause deformation of the unit by heat.
• When the remote sensor is under direct sunlight or strong lighting, the remote control will not work.
If so, please change the lighting or TV's position, or operate the remote control closer to the remote
sensor.
* to confirm your choices use OK button or right ARROW button.
NOTE: This TV is equipped with two remote controls. You can choose to use both remote controls or just
one. However, it is possible to pair only one Remote Control (no matter which one), in any case the
second remote control can still be used in the traditional way without a Bluetooth connection as
the first one.
3. FIRST TIME INSTALLATION
After all connections have been made properly, switch your TV on. Please follow the initial First Time
Installation (FTI) procedure on your screen and complete the installation. It will take a few minutes.
Step 1
Select your preferred language and location on the welcome page, then select CONTINUE to go
to the next step.
Step 2
Press
and
-
key simultaneously, while pointing to the TV bottom within the distance of 1 meter at least 3
seconds, Release your finger when the indicator light (red) of the remote flashes.
Press and key simultaneously,
while poinng to the TV boom within the distance
of 1 meter at least 3 seconds. Release your finger when
the indicator light (red) of the remote flashes.
