Then – move to
Scan
and make scanning. System will scan for channels and save them to channel list.
To install channels from satellite broadcasting, select
Satellite
and perform required settings according to
your actual satellite system configuration.
Delete
01 Ku_Hispasat 30W-5/30W-6 30.0W
Hispasat 30W-5/30W-6
Transponder
Satellite
Edit
Add
Scan
0
Signal Quality
0
Signal Level
001 10730 H 27500
LNB Type
LNB Power
22KHz
Unicable
IF Freq
SatPosition
Toneburst
DiSEqC1.0
DiSEqC1.1
09750/10600
Auto
Auto
Off
1 1210
SatA
None
None
None
02 Ku_Intelsat 901 27.5W
002 10770 H 30000
03 Ku_Eutelsat 7 West A 7.0W
003 10890 V 27500
04 Ku_Eutelsat 5 West A/B 5.0W
004 10917 V 7500
05 Ku_Amos 3/7 4.0W
005 10922 V 1667
06 Ku_ABS 3A 3.0W
006 10930 H 30000
07 Ku_Intelsat 10-02 0.8W
007 11262 V 30000
08 Ku_Astra 4A 4.8E
008 11302 H 30000
09 Ku_Eutelsat 7B/7C 7.0E
009 11330 H 9140
Satellite Tune
Select the satellite, you want to configure, and in most right column set correct DiSEqC port for it.
If you want to scan only some specific Transponder(-s) for it, check them in columns in the middle. If you
want to scan all transponders for satellite, just check satellite in most left column.
Repeat this for other satellites if they are present in your system.
Press
BLUE
button for scanning. System will scan for channels and save them to channel list.
To complete installation follow the instruction on the screen.
To scan more channels or to install channels of another TV system, after installation process completed,
select option
Another Mode
or
Next
to finish channel installation.
Another mode
Antenna
Next
Digital
0 Channels
Channel installation
Refer to
Chapter 5.1
for more information for TV channel installation.
Congratulations! You have successfully completed the First time installation of your TV.
11
English