UNPACKING
ATTENTION
: The weight of the Stromtank can be up to 265 Ibs /125 kg depending upon the
model. Use an appropriate lifting method as well as help from a third party when installing
the equipment.
While the Stromtank is still in its case, please move it to a location near the place where it will
be installed. Remove all jewelry including watches, rings and belts from your person to avoid
damage to the exterior of the Stromtank during removal and installation.
At first remove the cardboard box. Then carefully unscrew the upper screws (Torx size T25) on
the wooden case [Fig.1] and remove the top board [Fig.2].
When unpacking, check that the equipment has not been damaged during transportation
and all items listed below are present. If anything is missing it has to be indicated immediately
to your dealer. Check the packaging and the Stromtank carefully.
Package contents:
1 Stromtank unit
1 vacuum cup
1 locking key
1 pair non-slip gloves
1 AC power cord
1 warranty card
1 owner’s manual
1 microfibre cloth
After checking unscrew the screws (Torx size T25) on the front board to open it [Fig.3].
ATTENTION: Do not hold the Stromtank unit on its front and do not lift it!
Push the unit from the rear side out of the case [Fig 4].
The finish of the Stromtank is extremely delicate. We suggest wearing the supplied gloves
when handling the Stromtank to avoid abrasion or fingerprints caused by oils from the skin, etc.
Place the Stromtank on a level surface with an adequate ventilation. Make sure the surface
that will support this component can safely hold its weight up to 265 Ibs. There should be at
least 3 inches of clearance space on each side and 3 inches of clearance at the top as well as
above the unit.
Remove the cloth that covers the Stromtank to protect its finish. Save the cloth in the box to
use it again if you ever need to ship the Stromtank.
1
2
3
4
5
4
Summary of Contents for S 5000
Page 1: ......
Page 11: ...Made in Germany 2016 stromtank com All rights reserved 20 ...
