3.2.1
Unpacking
The transportation route is decisive in terms of the type of packing. The information marked on the packing must
be observed.
CAUTION
Risk of accidents caused by loose components falling down
In some cases, the assembly groups do not create an interference fit with each other.
► Always hook on and lift the assembly groups individually.
► Only use approved lifting tool, industrial trucks and slinging equipment with sufficient load-bearing
capacity.
► Use slinging points.
► Only allow transportation by qualified personnel.
RECYCLING
Dispose of the packaging material according to the local guidelines properly and in an environmental-
ly-friendly way.
3.3
Scope of delivery
12
12
14
14
SKB-0399
Fig. 1
The brake is delivered in assembled condition. The fixing screws (12) and the discs (14) are enclosed separate-
ly in the delivery.
On receipt, check the delivery for completeness using the packing list. Possible damage during transportation
and/or missing parts must be reported immediately, see section 11.2 for the address.
12
Mounting instructions Pressure-operated spring-actuated multi-disc brake KMB-ZM, KLB-ZM • No. 777-00001 D • 10/2017
