Original assembly/operating instructions Gear limit switch Type series 51 • No. 151-00004 H • 01.2018
23
Flange
Operating speed
Torsion angle (with a torque of 5 Nm)
Comment
F
n
max
= 1000 rpm
5 ± 0.5°
not for MC/MK
F+M
n
max
= 1000 rpm
5 ± 0.5°
not for MC/MK
Use of flange A / B
5.2.3
Drive
The following mounting conditions must be observed:
•
If possible, the drive should be engaged via a flexible connection, a flexible diaphragm coupling for example.
•
The ideal drive is carried out over a torsionally-stiff flexible coupling with low axial and radial restoring forces.
This compensates for any misalignments and offsets, e.g. drive flange type F / F+M, see section 5.3.1.
•
Observe the permissible shear force values, see section 4.1.7.
5.3
Optional equipment available
5.3.1
Drive Flange
A
Elastic flange type F
B
Elastic flange type F+M
* Adjustment range
Implement the counter flange according to the dimensional drawing.
Fig. 5
