21
MA_VEB100-3_A2_181015_en
3.5.2
3.5.2.1
Adjusting the bottom belt feed
Please see point „4.8.3 Tighten feeding belts“ in operating instructions.
Belt tension
3.5.2.2
The right plate could be adjusted with screw
(1)
at the arm.
Presser plate pressure (Fig. 11)
Turning clockwise
–
more pressure
Turning anti-clockwise
–
less pressure.
The left plate could be adjusted with screw
(2)
at the arm extension.
Same rule as above.
Fig. 11
3.5.2.3
The presser plates get lifted together with the arm. The left plate by the
adjustable eccentric bolt
(3)
at the arm extension
(4)
and the right plate by the
screw
(5)
at the lever
(6)
.
Belt feed lifting (Fig. 11)
Both adjustments are made from the bottom of the arm.
At highest position of the arm must be 1-2mm distance between lever and
bolt/screw. Otherwise the belts have no contact to the stitch plate, if the plunger
is adjusted for heavy fabric.
Summary of Contents for VEB100-3
