Assembly Instructions:
1.
Lay your pedestal frame pieces flat on the ground in the arrangement in which they will be
assembled:
Your 2 long, black vinyl pieces are your
Side Pieces
. The short, black vinyl piece will go at the
Foot
of
the bed. The short, unfinished piece will go at the
Head
of the bed. The 3
Center Support Pieces
will
go in the center of the pedestal frame and can be identified by the ‘slits’ in the wood pieces. You should
have a total of 3 unfinished
Center Support Pieces
: one
Center Support Piece
has two slits cut into it
and two
Center Support Pieces
have one slit cut into each.
2.
Stand one
Side Piece
up on its side and ensure the black vinyl side is facing the outside. Stand
the
Head Piece
on its side and line it up with the top INSIDE edge of the
Side Piece
that is standing
up. Screw the
Large Bracket
into the inside corner of these 2 pieces using the
Short Screws
to
secure them together.
3
