Strobel 141-23EV, Mechanic'S Instructions

Page: 31 / 40

27
MA_141_142_A10-6-7-3-6-5_130617_en
5
Notes on repair and adjustment
5.1
Transport plate assembly
Refer to the table for the transport and pressure plates needed for the various
classes.
In addition to the transport and pressure plates featured in the normal models,
optional transport and pressure plates with appropriate teeth and edge heights
are offered to handle various materials to be processed.
5.2
Exchanging the transport plate
Exchanging the transport plate is done by loosening the screw 171.0609.
(Fig. 12)
If a pressure plate needs to be exchanged, loosen screw 171.0502, which
holds the whole plate set in the bearing arm. Make sure when inserting each
pressure plate that the edge of the pressure plate is always about 0.1 mm lower
than the edge of the transport plate so that the needle can move over the edge
of the pressure plate without hitting it. (Fig. 12)