Chapter 1: Hardware
1-9
Stride MQTT Gateway User Manual, 1st Edition
Operation
Configuration and operation of the STRIDE MQTT Gateway is primarily conducted using the device’s web
interface, as discussed in Chapter 2. The hardware indicators and controls are described here.
POWER
ERROR
RS-485 TRANSMIT
RS-485 RECEIVE
RECOVERY MODE
BUTTON
POWER TERMINALS
RS-485 TERMINALS
RJ45 PORT
Front Panel Indicators
The Stride MQTT Gateway has four status LEDs, as shown below.
Front Panel LEDs
LED
Color
State
Description
PWR
GREEN
ON
Device powered
OFF
Device unpowered
ERR
YELLOW
OFF
No error
BLINK
SLOW-FAST-FAST-FAST Boot (about 60 sec., few minutes for the first boot)
BLINK SLOW
Communications error (Modbus, MQTT, etc.)
BLINK FAST
Watchdog restart
TX
RED
BLINK
Data transmitted over RS-485
OFF
No data over RS-485
RX
RED
BLINK
Data received over RS-485
OFF
No data over RS-485
NOTE:
LEDs on the top surface indicate: RED = active internal power; GREEN = internal memory activity.
