Now two people are required for this. We are now attaching the back guard
rails and side rails. Ensure the white chalk markings are facing inside the bed.
From the top of the picture you need to find and attach the following:
Top Guard Rail - RED - Part 2 x 1
Bottom Guard Rail - WHITE - Part 3 x 1
Siderail - Universal - Part 1 x 1
Top Guard Rail - RED - Part 2 x 1
Bottom Guard Rail - WHITE - Part 3 x 1
Siderail - Universal - Part 1 x 1
Siderail - Universal - Part 1 x 1
ON page three all fixings required are confirmed as per colour code.
TOP TIP
Locate the screws in each hole, however only screw in
halfway at this stage. You need the product to be flexible and
allow movement at this stage. You MUST re-tighten fully once
assemble has been completed.
