background image

Mattress Selection Available

Strictly Beds has a full range of mattresses to fit this bunk bed. 

To go to our selection please type in 

www.strictlbedsandbunks.co.uk/mattress

Using the Camera on your phone,  scan this barcode to 

take you to our mattress selection

AMELIA BED 

FRAME

(All Sizes)

IMPORTANT: DO NOT DISPOSE of 

the packaging until you are satisfied 

with your purchase.. Please keep all 

cardboard until fully satisfied.

Assembly Instructions

IMPORTANT – READ CAREFULLY – 

RETAIN FOR FUTURE REFERENCE

Single Size  Kit B

Double Size  Kit A

Instructions: 1/AMELIA

(Version March 2021)

CUSTOMER CARE

We have checked all parts to ensure they are free of damage. However timber is a natural, living product. 

Occasionally timber can still be adjusting to humidity, for this reason a crack or stretch mark may appear after 

the product has been packaged.

Strictly Beds and Bunks however have a FREE PARTS REQUEST 

service in this unlikely event. You need to order a part please go to

 

Parts Portal - www.strictlyhelpdesk.co.uk.

Email Assistance: [email protected]

Using the Camera on your phone  scan this barcode to 

take you our after sales. You can find various options as 

regards assistance on this purchase.

Summary of Contents for AMELIA BED FRAME









Reviews: