STEP 7: Repair Mode
Press and hold the
REPAIR MODE
start button for 5 seconds to enter the repair mode.
For some seriously over-discharged batteries and vulcanized batteries, this function can be used
to repair. The repair cycle is 24 hours. If the repair is not completed within 24 hours, you can
restart and enter the next --A 24-hour repair mode.
Someone needs to be on duty during the repair process. If the battery becomes too hot, it must
be 38 stopped. The repair work can be stopped by pressing the
CHARGE START/STOP
button
during work. The two clips cannot be short-circuited in the repair mode
Notes:
It is not possible to repair open-circuit batteries or short-circuit batteries.
The battery can not be connected to any discharge equipment during the repair.
It is strictly forbidden to repair the battery on the equipment.
41
Standby-screen (flicker)
GEL battery mode
AGM battery mode
Intelligent repair mode
