42
Water
Heat & Cooling
●
Do not cover the device while it is in operation as this may cause the Jump Starter to overheat.
This poses a risk of fire, electric shock, or injury.
●
Make sure that the ventilation around the device is good.
●
Keep the device away from heat and in or close to areas where the surrounding temperature
is relatively hot (e.g. stoves or other sources of heat). Never use the device near naked flames
(such as burning candles) or on hot surfaces.
●
The Jump Starter is designed to work best in normal ambient temperatures between 0°
and 35°C and to be stored at temperatures between 0°C and 45°C. The Jump Starter may
be damaged and the lifespan may be shortened if the device is stored or used outside this
temperature range. Do not subject the devices to dramatic changes in temperature. Do not
store your device in a hot vehicle or direct sunlight for extended periods.
●
Use the device only in a moderate climate (not in a tropical climate).
WARNING:
●
Never use the Jump Starter with damp or wet hands. Moisture can cause electric shock or
short circuits.
●
Do not use the Jump Starter in or near a bath, shower, swimming pool, or any container filled
with water, such as a sink.
●
Do not use in wet environments and do not immerse in liquid. Never pour liquids over or near
the Jump Starter. There is a risk of electric shock! If liquid does get into the housing, turn off
the Jump Starter immediately.
●
Make sure that the device is placed on a dry surface.
This device is not waterproof.
●
Make sure that the cables are not squeezed, bent, damaged by sharp edges, or put under
mechanical stress.
●
Avoid excessive thermal stress on the cables from extreme heat or cold.
●
Children may get entangled when playing with a cable (danger of strangulation). Cables are not
toys.
