5
5.
Your WaxBath™ will beep 3 times when the wax is fully
melted. The temperature will then begin to decrease to a
comfortable 55°C for use.
6.
Once the screen reads 55°C, test the temperature of the
wax cautiously using your elbox, followed by the inside
of your wrist. Alter the temperature using the and
buttons as needed.
7.
Clean and dry your chosen therapy area. See page 4 for
advice on how often and where you can use wax therapy.
8.
Dip your chosen therapy area into the wax, then fully
remove and allow to air dry. Dip again to build a second
layer of wax. Repeat until you have 4-5 layers of wax
built up.
Top tip:
To make smaller amounts of paraffin wax
easier to use, use the adjustable foot to tilt your
WaxBath™.
9.
Once the top layer of wax has dried, cover the therapy
area with a towel and relax whilst the heat from the wax
soothes the area.
10.
After 20-30 minutes, gently peel the wax off and
massage moisturisers or body oils into the therapy area.
11.
Repeat for all therapy areas.
12.
When you have finished your wax therapy, press the
power button to turn off your WaxBath™. Your WaxBath™
will automatically power off after 24 hours of non-use.
13.
Then unplug from the power source, clean, and store.
Summary of Contents for WaxBath
Page 2: ...2 ...
