Welcome
Thank you for choosing WaxBath™.
Your WaxBath™ ProTherapy Heated Paraffin Wax Bath provides a
variety of health and wellbeing benefits, including:
•
Salon-quality therapy for dry, rough and stressed skin
•
Protection for damaged skin, such as eczema
•
Promoting the absorption of essential nutrients to maintain
youthful skin
•
Alleviating aches and pains by stimulating blood flow and
improving circulation. Ideal for arthiritis sufferers and stiff
muscles.
C: Temperature (45°C - 95°C)
H: Time (1 - 99 minutes)
Increase the temperature/treatment time
Decrease the temperature/treatment time
Set the temperature/treatment time
Standby
SET
ON
OFF
How to Use your WaxBath
™
1.
Remove your WaxBath™ from its packaging, insert the
power cable and plug into a plug socket. A ‘beep’ will sound
when your WaxBath™ has power.
2.
Remove the lid and pour in your desired amount of
WaxBath™ Paraffin Wax Melts. Replace the lid to contain
the heat and help your wax melt faster.
3.
Push the standby button once to turn on your WaxBath™.
4.
Your WaxBath™ will start at 50°C (C50). Adjust the
temperature and treatment time to melt your desired
quantity of wax.
How to Clean your WaxBath
™
1.
Once the wax has solidified, turn your WaxBath™ back on
to melt a small amount of the outside of the wax to make it
easier to slide out and store. Make sure you have turned your
WaxBath™ off before moving it.
2.
Once your WaxBath™ has fully cooled, remove any remaining
wax using a clean damp cloth.
3.
Replace the lid and store your WaxBath™ with its power cable
ready for your next use.
Top tip:
Slide your solid wax out onto a chopping board and
cut up for easier storage. Your paraffin wax can be reused and
can last for over 2 years if looked after.
How Often and Where
Should I Use Wax Therapy?
Paraffin wax therapy works on two levels; moisturising and
softening the skin, whilst warming deeply to improve blood
circulation and reduce joint pain. It can be especially beneficial for
sufferers of arthritis pains and stiff muscles.
Treat yourself to wax therapy as often as you like!
•
Feet
•
Hands
•
Arms
•
Elbows and knees
1
2
3
5.
Once your wax has melted, allow it to cool to a comfortable
temperature of 50°C (C50) before use. Use this time to clean and
dry your therapy area.
6.
Once the LED screen reads C50, test the temperature of the wax
cautiously using your elbow, followed by the inside of your wrist.
Alter the temperature using + and – as needed.
7.
Dip your chosen therapy area into the wax, then fully remove
and allow to air dry. Dip again to build a second layer of wax.
Repeat until you have 4-5 layers of wax built up.
8.
Once the top layer of wax has dried, cover the therapy area with
a towel and relax whilst the heat from the wax soothes the area.
9.
After 20-30 minutes, gently peel the wax off and massage
moisturisers or body oils into the therapy area.
10.
Repeat for all therapy areas.
11.
To turn off the device, first put it in standby mode by pressing
the standby button once. Then unplug from the power source,
clean, and store.
Amount of WaxBath™
Paraffin Wax Melts
Melting Temperature
(C)
Time to Melt (H)
(approx.)
MINIMUM
1 bag (500g)
50°C
45 minutes
2 bags (1,000g)
90°C
60 minutes
3 bags (1,500g)
90°C
100 minutes
MAXIMUM
4 bags (2,000g)
90°C
120 minutes
Get to know your WaxBath
™
