MOUNTING THE TELESCOPIC HANDLE
- If necessary, use a telescopic handle to cut the branches at greater heights or in hard-to-reach places.
1. Unscrew the clamp screw for holding the cordless loppers on the holder and open the clamp.
2. Fasten the cordless loppers in the holder.
3. Close the clamp holding the cordless loppers and tighten the screw.
4. Connect the interconnecting cable to the battery.
5. When demounting, proceed in reverse order.
VERTICAL TILT ADJUSTMENT
1. Press the tilt adjustment release knob
2. Set the desired tilt angle. There are 4 angle settings available, from 0° to 90°.
3. Release the tilt adjustment release knob to lock the cordless loppers at the set angle.
HORIZONTAL TILT ADJUSTMENT
1. Grasp the telescopic handle in one hand and the holder in the other.
2. Rotate the holder to the desired angle ranging from -
90° to 90°.
USE
- Always maintain a stable posture and balance. Only work in areas you can safely reach. Never
overestimate your own strength. Do not use the power tool if you are tired.
- Always use work gloves when you are working with the tool, and also when you are treating or cleaning
it.
- The device is equipped with a locking button that prevents accidental start-up. To perform the actual
pruning it is necessary to press the trigger (3) and the locking button (4) simultaneously.
- Release the trigger (3) to return the blade to the open position.
USE WITH TELESCOPIC HANDLE
- To perform the actual pruning it is necessary to press the trigger (15) and the locking button (14)
- Release the trigger (15) to return the blade to the open position.
