The motion sensor is activated by infrared sources that enter the detection range, e.g. people, animals, etc. When
the motion sensor is activated, the solar light will light up and will light up until the motion sensor detects motion
in the detection range. Subsequently, the slight light mode is activated and the solar light will light up in this mode
until the set time delay has elapsed (15 seconds).
3.
SLIGHT LIGHT MODE (press the mode setting button 3 times)
The solar light will be on all the time.
WARNING BEFORE FIRST USE
Before using for the first time, remove the strip, the light sensors automatically control the solar light. When it
gets dark, the solar light turns on according to the set mode and starts using energy from the rechargeable
battery. If the solar lamp does not turn on, check the following:
1. Make sure the power switch is at
the “ON” position.
2. Make sure that the solar lamp is located on a surface which receives light and that the solar panel is exposed
to direct sunlight
PRECAUTIONS
1. Be aware of the fact that the solar light is designed to switch on automatically after dark. If it is near a
powerful source of light, it might not turn on.
2. The light’s batter
y is fully charged by the producer, but by the time the light arrives with the final customer,
it might be partially, or completely, discharged. For this reason, please leave the solar light to charge all day for
its maximum performance.
4.
Maintain the surface of the solar panel clean. A dirty panel may reduce the efficiency of the charging.
CLEANING TE SOLAR PANEL
Protect the solar panel from dirt. Otherwise, the charging efficiency of the battery is reduced. Clean it regularly
with a damp cloth or paper towel.