EN
MODEL
HEATING POWER
THERMOSTAT
VOLTAGE /
FREQUENCY
LENGTH OF POWER
CABLE
FINS
OR-
003.09
800 W / 1200 W /
2000 W
yes
230 V / 50 Hz
1,5 m
9
OR-
003.11
1000 W / 1500 W /
2000 W
yes
230 V / 50 Hz
1,5 m
11
SYMBOLS:
Do not dispose of household waste. Instead, environmentally acceptable way, contact the
recycling centers. Please take care the environment.
Protection class I.
Protection class IPX0.
Read the entire instruction manual before using fan heater.
Fan heater must not be plugged into a power socket while being serviced.
Caution: Risk of electric shock!
Do not attempt to disassemble of modify the unit or its accessories. In case any part is
damaged, immediately power off the unit and seek the assistance of a specialist.
In accordance with essential safety standards of applicable European directives.
Warning: In order to avoid overheating, do not cover the heater.
IMPORTANT INSTRUCTIONS
WARNING:
TO AVOID THE RISK OF ELECTRICAL SHOCK, FIRE OR INJURY TO PERSON, ALWAYS MAKE SURE THE
HEATER
IS UNPLUGGED FROM THE ELECTRICAL OUTLET BEFORE RELOCATING, SERVICING, OR CLEANING IT.
- Read all instructions before using this heater.
- Connect the appliance to single-phase AC power supply of the voltage specified on the rating label.
- This heater is intended for indoor, non-commercial, non-industrial, household use only. Do not use
outdoors. Do not use the heater for any other purpose.
- This heater is not intended for use in bathrooms, laundry areas, and similar indoor locations. Do not use
this heater in the immediate surroundings of a bath, a shower or a swimming pool.
- Never leave this heater unattended while it is in use. Always turn the heater to the “OFF” position and
unplug it from the electrical outlet when it is not in use.
- Extreme caution is necessary when this heater is used by or near children or invalids and whenever the
heater is left operating and unattended. Keep the heater out of the reach of children and pets. This
TECHNIC
AL
PARAME
TERS
: