EN
Choose your desired accessory (brush or nozzle) and
attach it to the suction hole.
Adjust the airflow by pushing the sliding block up and
down.
Plug the appliance and switch on.
Turn the vacuum cleaner on.
After filling the collecting container, the suction power
is considerably reduced.
Turn the vacuum cleaner off.
Unplug the appliance after use
Empty and clean the collection container.
Wet vacuuming
CAUTION:
The paper filter bag and the HEPA filter are
not suitable for wet vacuuming.
Remove the HEPA filter from the filter basket and
install the foam filter.
Unwind the power cord.
Attach the top of the vacuum cleaner to the collection
container and secure it with the hook.
To use the flexible hose, insert the end of the hose into
the suction hole. Make sure, that it is snapped in the
position.
CAUTION:
Before you start the appliance, make sure
that the hose assembly is in the position. or else the
appliance had mangled.
Choose your desired accessory (brush or nozzle) and
attach it to the suction hole.
