EN
4. Angle adjustment description
During the operation, the user can increase the air out-let angle, the biggest adjustment is 14 degrees. Firstly
tighten the adjustment knob at both ends of steel-pipe rack then gently press the tail top of the product with
hand, the heater will be tilted. Adjust the hot air direction to the user needed angle, now the heater blows
hot air up, if the user needs the direction of air to be horizontal blown out, gently press the control box top
at the front part of product.
SAFETY INSTRUCTIONS
Warning: In order to avoid overheating, do not cover the heater.
When using electrical appliances basic precautions should always be followed, including the following:
1)
Do not connect the appliance to the mains power socket if the voltage given on the rating plate differs
from the mains voltage.
2)
Children should be supervised to ensure that they do not play with the appliance. If the appliance is
damaged, do not use it any more.
3)
The heating device shall not be installed below a socket-outlets.
4)
Do not use outdoors or in humid place. Never use the heater in the bathroom, shower or near a
swimming pool etc.
5)
Do not place the appliance on moving vehicles or somewhere easy to be tipped over.
6)
When you don’t use the appliance for a long time, unplug the appliance. Don’t leave the heater for a
considerable amount of time when in use. Pull the plug straight out, never
remove the plug by pulling
on the cord.
7)
Use the appliance in places with good air ventilation, do not position it near a wall or corner.
8)
When the appliance is in use, keep it far from combustible, explosive articles or explosive, corrosive gas.
Keep the heater far from curtain or places where the air inlet can easily be blocked.
9)
It is recommended that a separate circuit serving only this appliance be provided, keep the power cord
far enough from the hot air outlet
