Strend Pro EO-008.T, Instruction Manual, Page: 24 / 25

EN
- The heater is not intended for use in bathrooms, laundry areas or similar indoor locations. Never place the heater
where it may fall into a bathtub or other water container.
- Do not use outdoors.
- Do not cover or obstruct any of the heat outlet grilles or the air intake openings of the heater.
- Do not place the heater on carpets having a very deep pile.
- Always ensure that the heater is placed on a firm level surface. Ensure that the heater is not positioned close to
curtains or furniture as this could create a fire hazard.
- Do not position the heater in front of, or immediately below, a wall socket.
- Do not insert any object through the heat outlet or air intake grilles of the heater.
- Do not use the heater in areas where flammable liquids are stored or where flammable fumes may be present.
- Particular care should be taken when the heater is situated in areas occupied by children or invalids.
- Always unplug the heater when moving it from one location to another.
- Do not use the heater if the power cord is damaged. If the power cord is damaged it must be replaced by a
recognized service agent or other qualified person. If the plug is damaged, see Plug Replacement details below.
- Young children should be supervised to ensure that they do not play with the appliance.
- This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental
capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning
use of the appliance by a person responsible for their safety.
- Children below the age of 3 years should be kept away from the appliance, except where they are under constant
supervision.
- This appliance can be used by children aged from 8 years and above and persons with reduced physical, sensory or
mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning
use of the appliance in a safe way and understand the hazards involved. Children shall not play with the appliance.
Cleaning and user maintenance shall not be made by children without supervision.
CAUTION: Some parts of this product can become very hot and cause burns. Particular attention has to be given
where children and vulnerable people are present.
CAUTION
: In order to avoid a hazard due to inadvertent resetting of the thermal cut-out this appliance must not be
supplied through an external switching device such as a timer or connected to a circuit that is regularly switched on
and off by the utility.
OPERATION OF THE HEATER
NOTE: It is normal when the heaters are turned on for the first time or when they are turned on after having not been
used for a long period of time the heaters may emit some smell and fumes. This will disappear when the heater has
been on a short while.
CONVECTOR HEATER WITH THERMOSTAT
Choose a suitable location for the heater, taking into account the safety instructions above. Insert the plug of the
heater into a suitable socket. Turn the thermostat knob fully in a clockwise direction to the maximum setting.
Turn on the heating elements by means of the rocker switches on the side panel. When the heating elements are on
the switches will illuminate. For maximum heat output both switches should be on. When the desired room
temperature has been reached, the thermostat knob should be turned slowly anti-clockwise until the thermostat is
heard to click off and the lights on the element switches are seen to go out. After this the heater will keep the air
temperature in the room at the set temperature by switching on and off automatically.