Im
1
2
3
4
5
6
7
8
9
1
1
Yo
m
w
M17 1RY
A. To operate compressor/gauge in normal fashion without preset function:
1. Connect the 12 volt plug (1) into 12V power socket.
2. If you wish to switch the unit of pressure measured, follow the steps 1 to 4 at "SOME VERY IMPORTANT
INFORMATION ON THE OPERATION OF YOUR DIGITAL TYRE PRESSURE GAUGE" opposite.
3. Connect the Valve/Tyre adaptor (2) to tyre air valve and push down the
Valve Lock Lever (2) to secure the connection.
4. Press "Reset/On" once to switch on the gauge (4). The gauge will display the current pressure (pressure reading
tol or — 30P.S.I.)
5. Press the Compressor Power Switch (3) to "Normal" position and the compressor will begin to operate. Inflate your
tyre or desired item to the correct pressure and shut off the compressor by pressing the Compressor Power Switch
(3) to the "Off" position. CAUTION: Do Not Over Inflate!
6. Disconnect the Valve Lock (2) from the tyre and the 12 volt plug (l ) from the cigarette lighter outlet.
B. To operate compressor / gauge using the preset automatic shut off feature:
1. Connect the 12 volt plug (1) into cigarette lighter outlet.
2. If you wish to switch the unit of pressure measured, follow the steps 1 to 4 at "SOME VERY. IMPORTANT
INFORMATION ON THE OPERATION OF YOUR DIGITAL TYRE PRESSURE GAUGE" above.
3. The gauge is pre-set at the factory to 30 PSI. This means the compressor will automatically shin off when it reaches
30 PSI. Press the "+" or "—" to change the shut off pressure setting to the desired automatic shut off pressure
(Maximum: 100 PSI). To return to the default setting of 30 PSI hold down the "Reset/On" button for 3 seconds,
please do this only when the air hose is not connected to the tyre as this will cause an incorrect reading.
4. Connect the Valve/Tyre Chuck (2) to tire air valve and push down the Valve Lock Lever (2) to secure the connection.
5. Press "Reset/On" to switch the gauge on. The gauge will display the current tyre pressure (pressure reading tolerance
+ or — 3P.S.I. at 30P.S.I.)
6. For Automatic Shut Off, press the Compressor Power Switch (3) to "preset" _ In the "preset" Mode the compressor will
automatically shut off when it reaches the preset pressure sett
JOHt
7. Press your Compressor Power Switch (3) to the "off" position when you are finished. CAUTION: Do Not Over Inflate?
R. Disconnect the Valve Lock (2) from the tyre and the 12 volt plug (1) from the cigarette lighter outlet.
C. To inflate sport equipment:
Ball:
1. Insert the Ball Adaptor (6) into the Valve/Tyre Chuck (2) and push down the Valve Lock Lever (2) to secure connection.
2. Press Adaptor's Needle (6) into Ball Carefully.
3. Follow Compressor Operation steps A.
Bike:
1. Connect Valve /Tyre Chuck (2) to bike stem and push down the Valve Lock Lever (2) to secure connection.
2. Follow "Compressor Operation" steps A
Airbed/Inflatables:
1. Insert the Mattress Adaptor (5) into the Valve/Tyre Chuck (2) and push down the Lever (2) to secure connection.
2. Press Mattress/Raft's Needle (5) into Mattress/Raft Carefully.
3. Follow Compressor Operation steps A.
Please do not dispose of this instructions sheet and retain for future reference
Streetwize Accessories:
Unit 1, Royce Trading Estate, Ashburton Road West,
Trafford Park, Manchester M17 1RY
Sales enquiries:
Technical enquiries:
www.streetwizeaccessories.com
SWAC5-Manual.qxp_Layout 1 20/03/2018 10:14 Page 1
