5
Mounting the LCD Monitor
1. Attach the suction mount to the back of the
LCD monitor as shown in figure 3 and then
attach to the desired location in your vehicle i.e.
dashboard, windscreen etc.
2. Ensure that the surface for mounting is both clean
and dry before fixing the suction mount.
3. Connect the cable attached to the monitor to the
12V power cable, and then insert the 12V power
cable into the vehicle’s 12V power socket.
Attention: When mounting the monitor, ensure that it
does not obstruct the drivers vision when driving
.
IMPORTANT: The LCD monitor does NOT come with a rechargeable battery and will need to be
connected to your vehicle’s 12V power socket. If you need access to a 12V socket when using
this product, we recommend that you purchase a suitable 12V socket adaptor that converts
your single 12V socket into two or three 12V sockets. For this, we highly recommend you use
Streetwize products SWPS1, SWPS9 and SWTSA.
Fig. 3
Mounting the Number Plate Bracket
1. Remove the top two rear number plate screws.
2. Stick on the double-sided tape on the front-facing side of the license plate mounting
bracket on the waterproof camera.
3. Position the camera on top of the number plate, ensuring the camera’s license plate
mounting bracket is behind the number plate.
4. Screw back the number plate screws.
5. Adjust the angle of the camera as needed.