1
Full Press: When fully pressed, you will hear a clicking sound.
Revised 03/21/2014
4.
Once the flashlight is on, press the Function-Select Button once more. The flashlight will turn off and the unit is now in Stun
Function.
5.
Press the Stun Activation Button to test fire the unit. Do not hold the button down for more than 1 second. You will see and
hear an electrical charge fire across the top of the unit between the contact probes.
6.
Once your test is complete, fully press
1
the Function-Select Button to move out of Stun Mode. If you fully press
1
this button
once you will be in the OFF mode and if you fully press
1
it twice you will be in the Light Mode.
Using the Stun Baton in Self Defense
1.
Before using the stun baton in self-defense, we recommend you become familiar with how this unit operates so you can
quickly protect yourself using the Stun Function. See
How to Quickly Access the Stun Function
below.
2.
Following the directions under
Testing the Stun Baton
, move the unit into the Stun Function Mode.
3.
Touch your assailant’s body with the contact probes and press the Stun Activation Button.
4. Touching anywhere on the assailant’s body will have an effect. However, the maximum effect is
achieved in the areas shown to the right:
5. When touching the assailant’s body, you will not see or hear the electrical charge as you do when the
unit is test fired. You can hold the Stun Activation Button down for more than 1 second, as this will not
damage the unit, as it will when being test fired.
6. You do not have to be concerned about the effects of the charge being transferred to you. Even if the
assailant touches you while being stunned, you will not feel the effects of the charge.
How to Quickly Access the Stun Function
1.
When you are using the flashlight fully press
1
the Function-Select Button then press the Stun Activation Button.
2.
When you are not using the flashlight, we recommend leaving the Function-Select Button in the Stun position. Then slide the
ON/OFF switch on the bottom of the unit to the OFF position. When you want to quickly use the Stun Function, slide the
ON/OFF switch on the bottom of the unit to the ON position and press the Stun Activation Button.
Effects of the Unit on an Assailant
1.
Touching an assailant for less than 1 second will cause minor muscle contractions and have a repelling effect.
2.
Touching an assailant for 1 to 2 seconds will cause muscle spasms and a dazed mental state.
3.
Touching an assailant for 3 to 5 seconds will cause loss of balance and muscle control, total mental confusion, and
disorientation. All effects to the assailant are temporary; the stun batons can cause no permanent harm. (
NOTE:
The device
should not be used for longer than 5 seconds.)
WARRANTY
:
Streetwise Security Products
extends a lifetime warranty to the
SWPFTB9R
for the product against defects in materials or
workmanship, with the following exceptions:
1.
The warranty does not cover damage resulting from accident, misuse or abuse, lack of reasonable care, moisture, the affixing of any
attachment not provided with the product, loss of parts, or recharging the unit in any manner not in accordance with the included instructions.
2.
The warranty will be voided if the unit has been opened or tampered with in any way (unless by an authorized dealer) or if any unauthorized
replacement parts have been used.
NOTICE:
Purchaser must check and abide by all local laws governing the possession and use of stun batons. In addition, the stun batons must only
be used in a lawful manner for self-defense. NOTE: Not to be used on children, persons with heart disease, or any vital part of the human body. Not to
be stored or used in environments where it is damp or humid or where there are extreme hot or cold temperatures. Do not use on metal objects.
Conditions of Sale:
Purchase of this product is an agreement by the purchaser/user to hold all sellers and manufacturers harmless of all liabilities
and damages.
To Obtain Service:
Contact the Authorized Dealer from whom you purchased this unit for a Return Merchandise Authorization. The return unit must
be sent postage prepaid and proof of purchase is required. Damage or loss occurring during shipment is not covered by this warranty.
