1
Full Press: When fully pressed, you will hear a clicking sound.
Revised: 10-22-2014
4.
Press the Stun Activation Button to test fire the unit. Do not hold the button down for more than 1 second. You will see and hear an electrical charge fire
across the top of the unit between the contact probes.
5.
Once your test is complete, fully press
1
either
the Push-Button Tail Switch or the Function-Select Button.
6.
If you pressed the Push-Button Tail Switch, then the safety is on and you will need to press this same button again before any of the functions will operate.
Warning:
Once you press this button again the safety will be off and ready to stun as soon as the Stun Activation Button is pressed again.
7.
If you fully pressed
1
the Function-Select Button, the unit will be in the OFF position. Remember the order of the icons: Light, Stun, & Off. Press this button
once more for the light or two times to return to the Stun position.
Using the Stun Baton in Self Defense
1.
Before using the stun baton in self-defense, we recommend you become familiar with how this unit operates so you can quickly
protect yourself with the Stun Function. See
How to Quickly Access the Stun Function
below.
2.
Using the directions above, move the unit into the Stun Function Mode.
3.
Touch your assailant’s body with the contact probes and press the Stun Activation Button.
4. Touching anywhere on the assailant’s body will have an effect. However, the maximum effect is achieved in the areas shown to
the right:
5. When touching the assailant’s body, you will not see or hear the electrical charge as you do when the unit is test fired. You can
hold the Stun Activation Button down for more than 1 second, as this will not damage the unit, as it will when being test fired.
6. You do not have to be concerned about the effects of the charge being transferred to you. Even if the assailant touches you while
being stunned, you will not feel the effects of the charge.
How to Quickly Access the Stun Function
1.
When the Flashlight is on, fully press
1
the Function-Select Button then press the Stun Activation Button.
2.
When the flashlight is not in use, we recommend leaving the Function-Select Button in the Stun position then fully pressing
1
the Push Button Tail Switch to
turn on the safety. You do this by locating the light and fully pressing
1
the Function-Select Button once more. This turns the unit OFF. When you want to
quickly use the Stun Function, push the Push-Button Tail Switch then the Stun Activation Button.
Important: Under normal circumstances, you can access the Stun Function by pressing the Function-Select Button until
you see the light then press it once more for the Stun Function. Remember, if you press it more than three (3) times and
do not see the light, the safety is on and none of the functions will work. Press the Push-Button Tail Switch to turn off the
Safety. However, in a panic situation when you need to quickly defend yourself, you will not have time to press all those
buttons. Therefore, when you are not using the flashlight, we recommend leaving the unit in position described in #2 in
the
How to Quickly Access the Stun Function
above.
Effects of the Unit on an Assailant
1.
Touching an assailant for less than 1 second will cause minor muscle contractions and have a repelling effect.
2.
Touching an assailant for 1 to 2 seconds will cause muscle spasms and a dazed mental state.
3.
Touching an assailant for 3 to 5 seconds will cause loss of balance and muscle control, total mental confusion, and disorientation. All effects to the
assailant are temporary; the stun batons can cause no permanent harm. (
NOTE:
The device should not be used for longer than 5 seconds.)
WARRANTY
:
Streetwise Security Products
extends a lifetime warranty to the
SWPFTB10R
for the product against defects in materials or workmanship, with
the following exceptions:
1.
The warranty does not cover damage resulting from accident, misuse or abuse, lack of reasonable care, moisture, the affixing of any attachment not
provided with the product, loss of parts, or recharging the unit in any manner not in accordance with the included instructions.
2.
The warranty will be voided if the unit has been opened or tampered with in any way (unless by an authorized dealer) or if any unauthorized replacement
parts have been used.
NOTICE:
Purchaser must check and abide by all local laws governing the possession and use of stun batons. In addition, the stun batons must only be used in
a lawful manner for self-defense. NOTE: Not to be used on children, persons with heart disease, or any vital part of the human body. Not to be stored or used
in environments where it is damp or humid or where there are extreme hot or cold temperatures. Do not use on metal objects.
Conditions of Sale:
Purchase of this product is an agreement by the purchaser/user to hold all sellers and manufacturers harmless of all liabilities and
damages.
To Obtain Service:
Contact the Authorized Dealer from whom you purchased this unit for a Return Merchandise Authorization. The return unit must be sent
postage prepaid and proof of purchase is required. Damage or loss occurring during shipment is not covered by this warranty.
