Caution
First make +12V wire connection then the ground connection and finally the remote connection.
Furthermore the +12V wire must always be fused at the battery for protection against possible damage. If
you need to replace the power fuse, replace it with a fuse of the same value. Using a fuse of a different type
or rating may result in a serious hazard.
This amplifier has two types of signal input terminal. RCA connector for low level inputs and 5-pin
modular connector for high level inputs. Adjustment of input levels is accomplished by the gain control of
both channels. Adjusting this control allows the amplifier gain to be controlled to match and balance both
channels.
The RCA input connector should be used when connecting the radio/cassette line out and this connection is
usually made by using RCA-RCA connector wires. LCH connector is used for LEFT channel and RCH
connector is used for RIGHT channel.
The high level input of this amplifier has unearthed low impedance circuitry and is used to connect the
radio/cassette speaker output signals. Ensure that you observe each channel and polarity marking when
connecting the speaker wires.
