STEP13:
Then secure the top footrest
supports using two 1/4” x 1
3/4 bolts with 1/4” flat and
locking washers. Secure the
bottom of the footrest sup-
ports to the footrest using
two 5/16” x 2 1/2” bolts
with four 5/16” flat washers
and two 5/16” nylock nuts.
Finger tightening only at
this point in the installation.
Install two 1” caps at the
bottom of the supports.
10
STEP14:
Then install the seat
back onto the armrest
tabs using the inner holes
on both sides with 1/4”
philips flat head screws
and fully tighten. Then go
around the entire frame
and tighten all the bolts
that were only finger
tightened earlier in the
instructions.
STEP15: Optional Long-
top Supports.
Then install the long top
supports using the outer
2 holes on the armrest
tabs with L-shape on top
facing toward the back of
the cart.
If you would like an 80”
LongTop and supports
please contact a Strech
Plastics Sales Rep at:
1-800-752-6799
STEP16:
Important:
Re-check all of the bolts and
screws and make sure they are tight.
Some may have become loose again
while installing other parts.
Congratulations! Your
finished with the instal-
lation of your new RXV 4
Passenger Seat Kit from
Strech Plastics Inc.
Summary of Contents for RX-6-26
Page 4: ...E F C G H I D J 3 A B ...
