Adjusting the flow water temperature
For the user who has chosen the technical reading according to page 5
you can easily adjust the flow water temperature to his or her own wish.
In order to adjust the flow water temperature the following actions have
to be taken.
Push the mode key briefly. The display will show the text
which
means that in this chapter adjustments can be made. Then push the step
key. The display will now show
The first figure indicates which
adjustment is being shown and the third and the fourth figure shows the
value of this adjustment. The standard adjustment is 85°C flow water
temperature. By means of the + or - key this value can be changed. This
changed value has to be stored by means of the store key. If after this,
the mode key is pushed briefly the technical reading
is shown
again.
The flow water temperature that has been adjusted only applies to the
central heating and is independent of the hot water facility for the
calorifier.
display
mode
key
step
key
reset
key
store
key
-
key
+
key
