STREAMVAC
™
2
W: www.streamline.systems E: [email protected] T: +44 (0)1626 830 830
W: www.streamline.systems E: [email protected] T: +44 (0)1626 830 830
3
Thank you for purchasing a STREAMLINE® Internal Vacuuming
System Kit
The
STREAMVAC™
is designed to vacuum dust from high, as well as, normally, inaccessible locations, such as
stairwells, whilst keeping both feet on the ground. The sectional pole is connected together to access a reach of
up to 30 feet. Various nozzle attachments are available for different surfaces and applications.
Safety Precautions
Instructions for use
Ensure you read the instruction manual before using
the machine.
•
Operators shall be adequately instructed
on the use of these machines, as with all
electrical equipment, care and attention must
be exercised at all times during use, you must
also make certain that routine and preventative
maintenance is carried out periodically to ensure
safe operation.
•
Failure to carry out maintenance as necessary,
including the replacement of parts to the
correct standard could render this equipment
unsafe and the manufacturer can accept no
responsibility in this respect.
•
This machine is for DRY USE only.
•
You must disconnect the machine from the
mains by removing the plug from the supply
socket BEFORE cleaning or maintenance and
when replacing parts or converting the machine
to another function.
•
This appliance is intended to be assembled,
cleaned and maintained by an adult.
•
This machine is not suitable for the collection of
biological hazards, hazardous or explosive dusts.
•
This machine is not a toy, children shall not play
with this machine.
•
This machine must not be used by persons with
reduced physical, sensory or motor capabilities,
or lack of experience or knowledge, unless they
have been given supervision or instruction.
•
If the vacuum cleaner stops working,
remove the plug from the wall before
investigating where the fault lies.
•
If the vacuum cleaner has a blockage,
switch off, remove the plug from the
socket outlet, and inspect the poles
and hose for debris. If the poles and the
hose are clear, replace the dust bag and
clean the filter.
•
The vacuum system should be
inspected before use for any damage.
•
Always replace any worn/damaged
parts immediately.
•
This machine must NOT be stored
outside, or used in wet environments,
or to collect wet materials.
•
The vacuum cleaner should be stored in
a dry place and is for indoor use only.
If you have any questions regarding the safe
operation of your
STREAMVAC™
, please contact
our Technical Support Team on
+44 (0)1626 830830
STREAMLINE® disclaims all liability for damage
or injury as a result of improper or unreasonable
use or failure to follow operating instructions of
the
STREAMVAC™
.
NB - Make sure that you are displaying
sufficient warning signs if you are working
in public places.
•
Connect the power lead to a mains power
supply. Connect the flexible vacuum hose to
the front of the
STREAMVAC™
.
•
Join the required number of carbon fibre
pole sections together, with the narrow
tapered end pointing in the direction of
the air flow. Connect the flexible hose to
the narrow taper end of the pole sections.
Select the required attachment and join it
to the larger taper end of the pole using the
plastic taper connector.
•
Switch the
STREAMVAC™
on and
commence with the task on hand.
NB - Care should be taken to avoid
contact with any electrical sources.
Electrocution can occur.
•
When the dust bag becomes full, remove
the
STREAMVAC™
head assembly by pulling
out the two tabs on either side and replace
the bag.
•
Dust the filter basket periodically and
replace it if it gets damaged or
becomes unserviceable.
•
Keep the taper joints of the sectional pole clean
and free from grit.
Setting Up
Maintenance
Pole Sections