background image

Installation

Everyday cleaning

Please Note :

 Since manufacturing 

of acrylic surface baths takes a great 
deal of manual labor especially in 
finishing, small irregularities in the 
surface are inevitable and inherent to 
the chosen product/material. 
Shrinkage lines, air holes and casting 
marks and blemishes on the 
underside of the bath (where they 
cannot be seen when the bath is 
turned upright) do not adversely 
affect performance and should not be 
regarded as defects.

It is advised to clean an acrylic 
surface bath regularly, to remove any 
insoluble products. Warm soapy 
water should be used and then the 
bath should be wiped. Do not let 
cleaners soak in.

Before fitting:

remove packaging and 

inspect the bath.We strongly 
recommend to use a professional 
and qualified plumber and installer. 
Instructions must be adhered to as 
we cannot accept responsibility for 
incorrect installation or damage 
during the process.

The 

 surface bath has good 

resistance properties to acids, but 
should not come into contact with 
alkalis or organic solvents, such as 
caustic soda, some multi-surface 
cleaners, bathroom cleaners, 
bleaches, harsh solvents, burning 
cigarettes, strong chemicals such as 
dry-cleaning fluids, paint strippers, 
acetone, citrus based chemicals, and 
nail/varnish removers.

acrylic

It is advised to always run some cold 
water before turning on the hot tap. 
With hot water temperatures not 
exceeding 65 Celsius.

M-2460-67FSWH-FM

M-2460-67FSWH-FM

Used drain meets the requirement of ASME 
A112.18.2/CSA B125.2  *Always follow the 
appropriate plumbing code

Reviews: