![background image](http://html.mh-extra.com/html/american-standard/scala-corner-whirlpool-and-bathing-pool-2664-102/scala-corner-whirlpool-and-bathing-pool-2664-102_specification-sheet_2925947001.webp)
SCALA CORNER™
WHIRLPOOL & BATHING POOL
HIGH GLOSS ACRYLIC
SCALA CORNER WHIRLPOOL & BATHING
POOL
❏
2664.118 Whirlpool with right hand drain outlet
❏
2664.218 Whirlpool with left hand drain outlet
• Acrylic with fiberglass reinforcement
• Factory installed and tested whirlpool
system
• 1.0 HP single speed self-draining pump/motor
with dry run seal
• Six multi-directional and individually flow-rate
adjustable color-coordinated jets
• Two color-coordinated air volume controls
• Anti-vortex suction fitting
• Deck-mounted color-coordinated air switch
On/Off control
• U.L.
®
Listed Hydromassage bathtub
• Textured tub bottom pattern
• Integral sump support feet
• Factory installed power cord with plug
• Dual molded-in lumbar support
• Molded-in seat
• Molded-in water retention flange
❏
2664.102 Bathing Pool only with Right-hand
Drain Outlet
❏
2664.202 Bathing Pool only with Left-hand
Drain Outlet
Nominal Dimensions: 1524 x 1524 x 502mm
(60” x 60” x 19-3/4")
© 2002 American Standard Inc.
BV-029
SPS 2664
To Be Specified - Required:
❏
Bath Filler*
❏
Drain: 1553.270 (specify Chrome , Polished Brass
or Satin)
❏
Color:
To Be Specified - Optional:
❏
Metal Air Volume Control Kit: 9850.200-two
per kit (specify Chrome, Polished Brass or Satin)
❏
Metal Jet Trim Ring Kit: 9860.200-two
per kit (specify Chrome or Polished Brass or Satin)
* See faucet section for models available
NOTE: Roughing-in dimensions and product
specifications shown on reverse side of page.
Revised 3/98
Compliance Certifications -
Meets or Exceeds the Following Specifications:
• Underwriters Laboratories - Hydromassage
Bathtubs UL 1795
• ASME A112.19.7M for Whirlpool Appliances
• ANSI Z124.1 for Plastic Bathtubs
• ASTM E162 for Flammability
• NFPA 258 for Smoke Density