23
2.2.2.5.5
SYSTEM MAINTAIN
Move the cursor to
【
SYSTEM MAINTAIN
】
(Frame turns red means selected), and press
【
Enter
】
to enter into system maintain setup interface.
AUTO RESET:
When switch is on, you can setup the time for device to restart.
SYSTEM UPDATE:
Copy the update file to the root directory of the thumb driver, and insert
it into USB 1.0, then press [Enter] to upgrade the firmware, and it will display the process of the
system upgrading, as following:
DEFAULT SETTINGS: Restore all the settings as the factory setting.
2.2.2.5.6
PTZ SETUP
Move the cursor to
【
PTZ SETUP
】（
Icon highlighted when selected
），
press
【
Enter
】
to enter
into setting interface, you can setup the parameters for each channel separately.
CHANNEL:
The channel of PTZ connected.
PROTOCOL:
select the protocol of different PTZ, there are two protocols to switch, and the
default is Pelco-D
